Search Immortality Topics:

Page 11,430«..1020..11,42911,43011,43111,432..11,44011,450..»


Grey’s Kim Raver Jumps Aboard NBC’s Revolution

Posted: September 6, 2012 at 5:11 am

Sep 5, 2012 07:56 PM ET by Kate Stanhope Follow katestanhope Tweet

Kim Raver

Grey's Anatomy and 24 grad Kim Raver is joining NBC's new drama Revolution in a recurring role, TVLine reports.

Executive-produced by J.J. Abrams, Revolution takes place 15 years in the future and shows the aftermath of a global blackout where the entire world lost power. The cast includes Billy Burke, Elizabeth Mitchell, Tracy Spiridakos and Giancarlo Esposito. The full Revolution pilot can be viewed early here.

Justified's David Meunier joins Revolution

Little is known about Raver's character other than that she will play a pivotal role.

Raver, 43, most recently played Dr. Teddy Altman on Grey's Anatomy for three seasons before exiting in May. She is also known for her role as Audrey Raines on 24, as well her work on The Nine, Lipstick Jungle and Third Watch.

Revolution premieres on Monday, Sept. 17 at 10/9c on NBC.

Go here to read the rest:
Grey’s Kim Raver Jumps Aboard NBC’s Revolution

Recommendation and review posted by G. Smith

Biotechnology Center opening pushed back

Posted: September 5, 2012 at 7:14 am

This section displays the last 50 news articles that were published.

Updated09/04/2012 08:43 PM

The first phase of the Biotechnology Research Center will be done soon. But the opening of the facility in Syracuse will not happen for at least a few months. This is not the first time the project has been delayed. Our Iris St. Meran tells us when we can expect it to be occupied.

To view our videos, you need to enable JavaScript. Learn how. install Adobe Flash 9 or above. Install now. Then come back here and refresh the page.

SYRACUSE, N.Y. -- This time last year, this building was just a foundation of beams. But construction crews have been working on the first phase of the Biotechnology Research Center.

Upstate Medical University Facilities and Planning Vice President Tom Pelis said, "Phase one of the project was to construct the building shell, to finish one-and-a-half floors, which includes seven laboratories, as well as administrative offices."

That is expected to be completed in a few weeks. It's a $22 million undertaking in a partnership between Upstate Medical University and SUNY ESF. After breaking ground in 2009, construction was stalled waiting for state funding.

Work resumed last spring with a projected opening of this past June. The delay is for good reason: Additional funding was received for phase two, which will have eight smaller incubator labs.

"We thought about the time people would start moving in for phase one, we would start construction for phase two, Pelis added. That made really no sense so we don't expect occupancy to occur much before the end of the year."

This has been a labor of love and Pelis says he's proud of the progress.

Continue reading here:
Biotechnology Center opening pushed back

Recommendation and review posted by G. Smith

AlloCure Begins Phase 2 Clinical Trial in Acute Kidney Injury

Posted: September 4, 2012 at 10:17 pm

BURLINGTON, Mass.--(BUSINESS WIRE)--

AlloCure, Inc. today announced that it has initiated a phase 2 clinical trial of AC607, the companys mesenchymal stem cell therapy, as a potential treatment for acute kidney injury (AKI). The randomized, double-blind, placebo-controlled, multi-center trial, designated ACT-AKI (AC607 Trial in Acute Kidney Injury) (NCT01602328), will enroll 200 cardiac surgery subjects at leading tertiary care centers in the United States.

ACT-AKI follows the positive results from a phase 1 AC607 trial in cardiac surgery subjects, which showed an excellent safety profile and encouraging data on the incidence of AKI and hospital length of stay, said Robert M. Brenner, M.D., AlloCure President and Chief Executive Officer. We have worked closely with leaders in the field on the design of ACT-AKI, and trial initiation represents an important milestone for AlloCure and the patients we collectively serve.

AC607 is a promising therapeutic candidate for AKI, for which effective therapies are greatly needed, said Richard J. Glassock, M.D., Emeritus Professor of Medicine at the Geffen School of Medicine at the University of California, Los Angeles. The initiation of ACT-AKI represents a critical step in the development of an innovative therapy for this all-too-common, serious and costly medical condition, for which no approved treatments currently exist beyond supportive care.

About AC607

AC607 is a novel biologic therapy under development for the treatment of AKI. AC607 also possesses potential applications in other grievous illnesses. AC607 comprises allogeneic bone marrow-derived mesenchymal stem cells that are harvested from healthy adult donors and then expanded via a mature and state-of-the art manufacturing process. AC607 homes to the site of injury where it mediates powerful anti-inflammatory and organ repair processes via the secretion of beneficial paracrine factors, without differentiation and repopulation of the injured kidney. Importantly, AC607 avoids recognition by the hosts immune system, enabling administration in an off the shelf paradigm without the need for blood or tissue typing.

About AlloCure

AlloCure, Inc. is a privately held, clinical-stage biotechnology company focused on the treatment of kidney disease. The company is a leader in the AKI field and is pioneering the development of the first effective therapy for the treatment of AKI. The companys headquarters is located in Burlington, MA. For more information about AlloCure, please visit the companys web site at http://www.allocure.com.

Go here to read the rest:
AlloCure Begins Phase 2 Clinical Trial in Acute Kidney Injury

Recommendation and review posted by G. Smith

ACT’s Chief Scientific Officer Dr. Robert Lanza to Deliver Opening Keynote Address at 4th Annual Stem Cell Symposium …

Posted: September 4, 2012 at 10:17 pm

MARLBOROUGH, Mass.--(BUSINESS WIRE)--

Advanced Cell Technology, Inc. (ACT; OTCBB: ACTC), a leader in the field of regenerative medicine, announced today that its chief scientific officer, Robert Lanza, M.D., will be delivering the opening Keynote Speech at the 4th Annual Stem Cell Symposium 2012, being held in Singapore, September 6-7. Dr. Lanzas presentation is titled Pluripotent Stem Cells From Benchtop to Clinic.

With the theme, Stem Cell Based Therapy, the symposium will have a particular focus on clinical trials and industrial application of stem cells. Sponsored by Stem Cell Society of Singapore (SCSS), the conference will include scientific presentations from key contributors from academic, clinical, and commercial organizations who are translating basic research on stem cells into therapeutics, with a focus on applying engineering technologies to provide medical solutions.

In their opening statement, the organizers state, We are all keeping our fingers crossed for ACTs success, which will also bring a big boost to the stem cell community.

Other topics of the conference include human induced pluripotent stem cells (hiPSCs), drug screening, adult and cancer stem cells, and stem cell therapies emerging from Asia, with presentations from Indian, Korean and Japanese regenerative medicine companies. There will also be a joint session with the International Society for Cellular Therapy (ISCT) covering important issues concerning the commercialization of stem cells, and addressing issues such as reimbursement, manufacturing, characterization, and clinical implementation issues unique to cell therapies.

About Advanced Cell Technology, Inc.

Advanced Cell Technology, Inc. is a biotechnology company applying cellular technology in the field of regenerative medicine. For more information, visit http://www.advancedcell.com.

Forward-Looking Statements

Statements in this news release regarding future financial and operating results, future growth in research and development programs, potential applications of our technology, opportunities for the company and any other statements about the future expectations, beliefs, goals, plans, or prospects expressed by management constitute forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Any statements that are not statements of historical fact (including statements containing the words will, believes, plans, anticipates, expects, estimates, and similar expressions) should also be considered to be forward-looking statements. There are a number of important factors that could cause actual results or events to differ materially from those indicated by such forward-looking statements, including: limited operating history, need for future capital, risks inherent in the development and commercialization of potential products, protection of our intellectual property, and economic conditions generally. Additional information on potential factors that could affect our results and other risks and uncertainties are detailed from time to time in the companys periodic reports, including the report on Form 10-K for the year ended December 31, 2011. Forward-looking statements are based on the beliefs, opinions, and expectations of the companys management at the time they are made, and the company does not assume any obligation to update its forward-looking statements if those beliefs, opinions, expectations, or other circumstances should change. Forward-looking statements are based on the beliefs, opinions, and expectations of the companys management at the time they are made, and the company does not assume any obligation to update its forward-looking statements if those beliefs, opinions, expectations, or other circumstances should change. There can be no assurance that the Companys clinical trials will be successful.

See original here:
ACT’s Chief Scientific Officer Dr. Robert Lanza to Deliver Opening Keynote Address at 4th Annual Stem Cell Symposium ...

Recommendation and review posted by G. Smith

Cytomedix's AutoloGel System Featured in Continuing Education Program at the Paralyzed Veterans of America Summit 2012

Posted: September 4, 2012 at 10:17 pm

GAITHERSBURG, MD--(Marketwire -09/04/12)- Cytomedix, Inc. (CMXI) (CMXI), a fully integrated regenerative medicine company commercializing and developing innovative platelet and adult stem cell technologies, today announced that the Company's AutoloGel System was highlighted in a continuing education program at the Paralyzed Veterans of America Summit 2012 held August 28 to 30 at the Paris Las Vegas Hotel.

The AutoloGel System is a device for the production of autologous platelet rich plasma ("PRP") gel, and is the only PRP device cleared by the U.S. Food and Drug Administration ("FDA") for use in wound management.

The program, titled, "Platelet Rich Plasma (PRP) Gel for Wounds on Persons with SCI," was delivered by Laurie Rappl, PT, DPT, CWS, Clinical Development Liaison for Cytomedix. Ms. Rappl's discussion addressed the underlying mechanisms of action that allow the Company's physiologically relevant concentration of PRP in the AutoloGel System to accelerate healing in recalcitrant wounds in patients with Spinal Cord Injuries ("SCI"), and highlighted the clinical data demonstrating rapid reduction in wound area and volume, as well as reduction of undermining and sinus tracts/tunnels in non-healing wounds in patients with SCI.

"The physiology of SCI -- such as decreased blood flow, blood pressure and blood supply -- causes impairment at every step of the wound healing process. A physiologically relevant concentration of PRP has been shown to improve healing in even the hardest to treat chronic wounds in SCI patients," noted Ms. Rappl.

"It is especially rewarding for Cytomedix to have a continuing education program highlighting the benefits of the AutoloGel System for the treatment of chronic wounds in SCI patients. Pressure ulcers and other chronic wounds are persistent medical challenges that compromise the health and quality-of-life for these paralyzed patients," stated Martin P. Rosendale, Chief Executive Officer of Cytomedix. "Our clinical data demonstrates how the AutoloGel System's physiologically relevant concentration of PRP can rapidly restart the healing process in complex and chronic wounds, including wounds that were recalcitrant to other treatments."

About The Paralyzed Veterans of America SummitParalyzed Veterans' Summit 2012 + EXPO brings together more than 700 healthcare professionals in SCI and multiple sclerosis (MS) care. Doctors, nurses, occupational therapists, physical therapist, social workers and researchers convene to explore and implement holistic strategies to strengthen the continuum of care for SCI and MS patients.

The Paralyzed Veterans of America Summit serves as an educational venue bringing together professionals representing the full spectrum of SCI and MS healthcare and to support clinicians in their pursuit of maintaining their specialty certification and/or license to practice. The objectives are to enhance multi-specialty care across the lifespan of individuals with SCI and MS; to assess advances in the delivery of healthcare services; to present innovative models of care management; to improve practice skills of clinicians, surgeons, researchers and administrators; to discuss evidence-based medicine; to increase the body of knowledge on spinal cord injury and multiple sclerosis, their medical complications and consequences; to promote educational opportunities; to identify research priorities; and to present data on new developments in assessment and treatment.

About Cytomedix, Inc. Cytomedix, Inc. is a fully integrated regenerative medicine company commercializing and developing innovative platelet and adult stem cell separation products that enhance the body's natural healing processes. The Company's advanced autologous technologies offer clinicians a new treatment paradigm for wound and tissue repair. The Company's patient-derived PRP systems are marketed by Cytomedix in the U.S. and distributed internationally. Our commercial products include the AutoloGel System, cleared by the FDA for wound care and the Angel Whole Blood Separation System. The Company is developing novel regenerative therapies using our proprietary ALDH Bright Cell ("ALDHbr") technology to isolate a unique, biologically active population of a patient's own stem cells. A Phase 2 trial evaluating the use of ALDHbr for the treatment of ischemic stroke is underway. For additional information please visit http://www.cytomedix.com.

Safe Harbor StatementStatements contained in this press release not relating to historical facts are forward-looking statements that are intended to fall within the safe harbor rule for such statements under the Private Securities Litigation Reform Act of 1995. The information contained in the forward-looking statements is inherently uncertain, and Cytomedix' actual results may differ materially due to a number of factors, many of which are beyond Cytomedix' ability to predict or control, including among many others, risks and uncertainties related to the Company's reimbursement related efforts, the Company's ability to capitalize on the benefits of the above-referenced CMS determination, the Company's ability to successfully and favorably conclude the negotiations and related discussions with the above-referenced global pharmaceutical company, the Company's ability to successfully integrate the Aldagen acquisition, to successfully manage contemplated clinical trials, to manage and address the capital needs, human resource, management, compliance and other challenges of a larger, more complex and integrated business enterprise, viability and effectiveness of the Company's sales approach and overall marketing strategies, commercial success or acceptance by the medical community, competitive responses, the Company's ability to raise additional capital and to continue as a going concern, and Cytomedix's ability to execute on its strategy to market the AutoloGel System as contemplated. To the extent that any statements made here are not historical, these statements are essentially forward-looking. The Company uses words and phrases such as "believes", "forecasted," "projects," "is expected," "remain confident," "will" and/or similar expressions to identify forward-looking statements in this press release. Undue reliance should not be placed on forward-looking information. These forward-looking statements are subject to known and unknown risks and uncertainties that could cause actual events to differ from the forward-looking statements. More information about some of these risks and uncertainties may be found in the reports filed with the Securities and Exchange Commission by Cytomedix, Inc. Cytomedix operates in a highly competitive and rapidly changing business and regulatory environment, thus new or unforeseen risks may arise. Accordingly, investors should not place any reliance on forward-looking statements as a prediction of actual results. Except as is expressly required by the federal securities laws, Cytomedix undertakes no obligation to update or revise any forward-looking statements, whether as a result of new information, changed circumstances or future events or for any other reason. Additional risks that could affect our future operating results are more fully described in our U.S. Securities and Exchange Commission filings, including our Annual Report on Form 10-K for the year ended December 31, 2011 and other subsequent filings. These filings are available at http://www.sec.gov.

The rest is here:
Cytomedix's AutoloGel System Featured in Continuing Education Program at the Paralyzed Veterans of America Summit 2012

Recommendation and review posted by G. Smith

EV Group Unveils Its Next-Generation EVG150 Automated Resist Processing Platform For High-Volume Coating/Developing …

Posted: September 4, 2012 at 10:17 pm

TAIPEI, Taiwan, Sept. 4, 2012 /PRNewswire/ --EV Group (EVG), a leading supplier of wafer bonding and lithography equipment for the MEMS, nanotechnology and semiconductor markets, today unveiled its next-generation EVG150 automated resist processing system. The high-volume coater/developer has been completely redesigned to provide customers with a flexible, modular platform that integrates spin coating and developing with EVG's advanced, proprietary spray coating technology.

(Photo: http://photos.prnewswire.com/prnh/20120904/SF67114)

"Close collaboration with our customers made it clear that the next logical step for our coater/developer technology was to create a universal approach for high-volume processing of devices with more complicated structures and topographies," stated Markus Wimplinger, EV Group's corporate technology development and IP director. "This latest incarnation of our EVG150 system addresses customers' production needs for back-end lithography, conformal coating and planarization all in one modular, fully automated platform. Leveraging EVG's 15 years of experience in resist coating and developing, and particularly our spray coating, the EVG150 is ideally suited for high-volume coater/developer applications needing increased uniformity and process flexibility."

Part of EVG's resist processing equipment family, which addresses all wafer sizes up to 300 mm, the EVG150 platform can accommodate wafers from 50 mm to 200 mm in diameter, and enables up to four wet process modules to be combined with two stacks of hot plates, chill plates and vapor prime modules. The system performs spin coating, developing, spray coating and lift off, and its modular structure helps minimize system downtime and improve serviceability. Throughput is optimized via EVG's latest Computer Integrated Manufacturing (CIM) Framework software platform and unmatched process control.

EVG currently has more than 100 customers implementing its proprietary OmniSpray technology, which is also integrated into the new EVG150 resist processing platform. EVG's OmniSpray technology specifically allows the conformal coating of high topography surfaces via its proprietary ultrasonic nozzle. Spray coating technology is ideally suited for ultra-thin, fragile or perforated wafers. Additionally, the implementation of OmniSpray coating can result in a greater-than-80-percent reduction in material consumption compared to traditional spin coating. Another available option for the EVG150 platform is EVG's NanoSpray technology, which is an enhanced, patented coating technique that can coat surfaces with vertical sidewall angles thus, for example, enabling conformal coating of through-silicon vias (TSVs) with polymer liners and photoresist.

The modular EVG150 automated resist processing platform is available immediately for demonstration and evaluation.

For media interested in learning more about EVG's technology solutions, please visit EV Group at booth #1076 at SEMICON Taiwan in Taipei, where the company will be exhibiting from September 5-7, 2012.

EV Group (EVG) is a leading supplier of equipment and process solutions for the manufacture of semiconductors, microelectromechanical systems (MEMS), compound semiconductors and power devices, and nanotechnology devices. Key products include wafer bonding, thin-wafer processing, lithography/nanoimprint lithography (NIL) and metrology equipment, as well as photoresist coaters, cleaners and inspection systems. Founded in 1980, EV Group services and supports an elaborate network of global customers and partners all over the world. More information about EVG is available at http://www.EVGroup.com.

Read the original post:
EV Group Unveils Its Next-Generation EVG150 Automated Resist Processing Platform For High-Volume Coating/Developing ...

Recommendation and review posted by G. Smith


Page 11,430«..1020..11,42911,43011,43111,432..11,44011,450..»